syngo Dynamic Evaluation
4. Creating a Baseline Image
A baseline image is used as a basis for all enhancement calculations.
The enhancement is calculated relatively to the base- line image. Therefore, the baseline image must show the state before enhancement starts.
By default, the first image of the loaded images is used as the baseline image.
Before the enhancement starts, you can also define the last image as the baseline image. If you do so, the mean gray values of the selected image and all the images that have been acquired before the selected image are displayed in the baseline image. The result is a smoother image that can be used to define the ROIs.
If you want to use a different baseline image, proceed as follows:
•Scroll to the required image in the tomo segment.
•Click on the button Generate baseline image with the mouse.
313
