Workflow Information
Auto Load in 3D and Post- processing Presets
You can activate the Auto load in 3D function on the Examination card/Auto Tasking and link it to a recon job. For example, the 2nd recon job with thinner slice width in some of the examination protocols.
On the 3D card you have the ability to create Range Parallel and Radial protocols for
For example, if you always do sagittal MPRs for a Spine examination, once you load a Spine examination into the 3D card, select the image type (MPR, MIP Thin), select the orientation and open the Range Parallel function. Adapt the range settings (Image thickness, Distance between the images etc.) and hit the link but- ton. From that point on, you have a predefined post- processing protocol, linked to the series description of a Spine examination.
The same can be done for VRT presets. In the main menu, under Type/VRT Definition, you can link VRT pre- sets with a series description.
38
