Siemens Software version syngo CT 2005C manual How to Create your own Scan Protocols

Workflow Information

How to Create your own Scan Protocols

There are two different ways to modify and create your scan protocols:

Edit/Save Scan Protocol

If you want to modify an existing protocol or create a new one, e.g., you want to have two “AbdomenRou- tine-Protocols” with different slice width, we recom- mend to do this directly on the Examination card.

User-specific scan protocols can be saved with the fol- lowing basic procedure:

•Register a patient, you can choose any patient posi- tion in the “Patient Model Dialog“.

•Select an existing scan protocol in the “Patient Model Dialog”.

•Modify the scan protocol, change parameters, add new ranges etc., so that the new protocols fit your needs.

•Scan your patient as usual.

•Check if all parameters are as you desire.

•Select Edit/Save Scan Protocol in the main menu.

•Select the folder where you want the new protocol to appear and the scan protocol name in the pop-up dialog.

•You can either use the same name to overwrite the existing scan protocol, or enter a new name, which will create a new protocol name and will not alter any of the existing protocols already stored.

39