Toshiba 200L, 280, 230L, 3511 manual Select the PPD file for the equipment and click Select

2.Select the LaserWriter 8 icon (and select the AppleTalk zone if configured). Then select this equipment displayed in the list, and click [Create].

•The Select a PostScript Printer Description File dialog box appears.

3.Select the PPD file for the equipment and click [Select].

•The PPD file varies depending on the equipment.

TOSHIBA_e-STUDIO4511Series (for e-STUDIO4511 Series) TOSHIBA_e-STUDIO450Series (for e-STUDIO450 Series) TOSHIBA_e-STUDIO280Series (for e-STUDIO280 Series)

4.Select each option according to the configuration of this equipment and click [OK].

— Finisher

Not Installed — Select this if a finisher is not installed.

Single Position Stapler — Select this when the Single-staple Finisher (only for e-STUDIO3511, e-STUDIO350, and e-STUDIO280 Series) is installed.

Multi-Position Stapler — Select this when the Multi-staple Finisher or Sad- dle-stitch Finisher is installed.

Printing Guide — Installing Client Software for Macintosh 175