Toshiba e-Studio 350, 200L, 280, 230L, 3511 manual Ls /opt/toshiba/tap/interface

For e-STUDIO450 Series and e-STUDIO280 Series

mkquedev -q <queue name> -d dev_<queue name> \ -a backend = /opt/toshiba/tap/bin/estbwBackend

10.Enter the following command:

For e-STUDIO4511 Series

cp /usr/lib/lpd/pio/predef/net_est4511 \ /opt/toshiba/tap/filter/<queue name>

For e-STUDIO450 Series and e-STUDIO280 Series

cp /usr/lib/lpd/pio/predef/net_estbw \ /opt/toshiba/tap/filter/<queue name>

Creating a print queue manually on Linux

1.Enter the following command:

ls /opt/toshiba/tap/interface

2.If the above directory does not exist, enter the following com- mand:

mkdir /opt/toshiba/tap/interface

3.

4.

5.

As root open your Linux/Unix editor.

Open your Linux/Unix editor.

Create the following file.

/opt/toshiba/tap/interface/<queue name>.conf

6.Add a line as below in the <queue name>.conf. dest=<IP address>

7.Save the file.

8.Enter the following command:

For e-STUDIO4511 Series

cp /opt/toshiba/tap/model/net_est4511 \ /opt/toshiba/tap/interface/<queue name>

For e-STUDIO450 Series and e-STUDIO280 Series

cp /opt/toshiba/tap/model/net_estbw \ /opt/toshiba/tap/interface/<queue name>

9.Enter the following command:

/opt/toshiba/tap/bin/modPrintcap \ -a <queue name> <IP address>

10.Enter the following command:

ls /opt/toshiba/tap/bin/flag_<queue name>

Printing Guide — Installing Client Software for UNIX 191