Toshiba 200L, 280, 230L, 3511 Finisher, Hole Punch Unit, Auto Duplexer, Upper Drawer/Paper Type

•1 Drawer & Pedestal 1 — Select this when the first drawer and the upper pedestal is installed.

•1 Drawer & Pedestal 2 — Select this when the first drawer and both upper pedestal and lower pedestal are installed.

•2 Drawers — Select this when the first and second drawers are installed.

•2 Drawers & Large Capacity Feeder — Select this when 2 drawers and the Large Capacity Feeder is installed.

•2 Drawers & Pedestal 1 — Select this when 2 drawers and the upper pedestal is installed.

•2 Drawers & Pedestal 2 — Select this when 2 drawers and both upper pedestal and lower pedestal are installed.

2)Finisher

This sets whether or not the optional finisher is installed.

•None — Select this when finisher is not installed.

•Hanging Finisher — Select this when the Single-staple Finisher is installed.

•Finisher — Select this when the Multi-staple Finisher is installed (for e-STUDIO450 Series and e-STUDIO4511 Series only).

•Saddle Stitch Finisher — Select this when the Saddle-stitch Finisher is installed.

•Job Separator — Select this when the Job Separator is installed (for e-STUDIO450 Series and e-STUDIO280 Series only).

•Offset Stacker — Select this when the Offset Stacker is installed (for e-STUDIO450 Series and e-STUDIO280 Series only).

3)Hole Punch Unit

This sets whether or not the optional hole punch unit is installed.

•None — Select this when hole punch unit is not installed.

•2 Holes — Select this when the 2 hole punch unit is installed.

•2/3 Holes — Select this when the 2/3 hole punch unit is installed.

•4 Holes (F) — Select this when the 4 hole (F) punch unit is installed.

•4 Holes (S) — Select this when the 4 hole (S) punch unit is installed.

4)Auto Duplexer

This sets whether or not the optional automatic duplexer is installed. This is available only for e-STUDIO280 Series.

•None — Select this when the optional automatic duplexer is not installed.

•Installed — Select this when the optional automatic duplexer is installed.

5)Upper Drawer/Paper Type

This sets the paper size and paper type set in the upper drawer.

6)Lower Drawer/Paper Type

This sets the paper size and paper type set in the lower drawer.

7)Pedestal Upper/Paper Type

This sets the paper size and paper type set in the upper pedestal. This can be set only when the upper pedestal is installed.

8)Pedestal Lower/Paper Type

This sets the paper size and paper type set in the lower pedestal. This can be set only when the lower pedestal is installed.

9)Large Capacity/Paper Type

This sets the paper size and paper type set in the Large Capacity Feeder. This can be set only when the Large Capacity Feeder is installed.

10)Bypass Feeder/Paper Type

This sets the paper type set in the Stack Feed Bypass.

Printing Guide — Printing from Windows 247