Printing Guide — Installing Client Software for UNIX 187
•For HP-UX:
uname -a
Output on screen should be:
HP-UX
•For IBM AIX:
uname -a
Output on screen should be:
AIX
•For Linux:
uname -a
Output on screen should be:
Linux
•For OpenUnix:
uname -a
Output on screen should be:
OpenUNIX
NOTE: •If the output is not as above, ask your administrator.
4. Change to the root directory.
5. Enter the following command:
•For Solaris:
tar xvf solaris.tar
•For HP-UX:
tar xvf hpux.tar
•For IBM AIX:
tar xvf aix.tar
•For Linux:
tar xvf linux.tar
•For OpenUnix:
tar xvf openunix.tar
6. The command extracts all the required files and installs them

in the correct locations. Continue the procedure for configur-

ing the print queue.

P.187 "Configuring the Print Queue"

Configuring the Print Queue

After you copy UNIX Filters, you can configure the print queue.
There are two ways to configure the print queue: one is creating a print queue using est4511add/
estbwadd, and the other is creating a print queue manually without using est4511add/estbwadd.
P.188 "Creating a Print Queue Using est4511add/estbwadd"
P.188 "Creating a Print Queue Manually"