Toshiba 200L, 280, 230L, 3511, e-Studio 350 Click OK Configuring Macintosh AppleTalk printing

	Offset Tray — Select this when the Offset Tray is installed (only for
	e-STUDIO450 Series and e-STUDIO280 Series).
NOTE:	• When you select “Multi-Position Stapler” or “Multi-Position Stapler and
	Hole Punch”, the saddle-stitching function will be selectable for print-
	ing. However, saddle-stitching is available only when the Sad-
	dle-stitch Finisher is installed.
	— Lower Drawer (only for e-STUDIO280 Series)
	Not Installed — Select this when the Lower Drawer is not installed.
	Installed — Select this when the Lower Drawer is installed.
	— Pedestal
	Not Installed — Select this when no pedestal is installed.
	Pedestal 1 — Select this when the Paper Feed Pedestal is installed.
	Pedestal 2 — Select this when the Paper Feed Pedestal and Drawer Module are
	installed.
	LCF — Select this when the Large Capacity Feeder is installed.
	— ADU (only for e-STUDIO280 Series)
	Not Installed — Select this when the ADU is not installed.
	Installed — Select this when the ADU is installed.

12.Click [OK].

Configuring Macintosh AppleTalk printing

PREPARATION: • Before installing the printer driver for AppleTalk printing on Macintosh, check with your system administrator to make sure of the following:

-This equipment is connected to the network and turned on.

-The AppleTalk settings is correct.

1.Click Apple menu and select [Chooser].

•The Chooser dialog box appears.

174 Printing Guide — Installing Client Software for Macintosh