Option Value | Alternate | Description |
| Value |
|
|
|
|
|
|
|
left2right=on | ON | Select left to right page layout for booklet printing mode. |
|
| This is the default setting. |
|
| If the value is ON then the layout of the pages is from Left to |
|
| Right as shown in the figure below. |
|
|
|
If left2right=off then long edge binding is selected, otherwise if left2right=on then short edge binding is used.
Example: The command to select left to right page layout for booklet printing mode is “lp
— Center Margin
The booklet mode center margin can be selected using the following options.
Option Value | Alternate | Description |
| Value |
|
|
|
|
|
|
|
centermargin |
| Select the center margin value for booklet printing mode. |
=value |
| This value specifies in pixels the Center Margin or the “Gutter”. |
|
| This is in addition to the center margin already specified by the |
|
| application. The valid range for value is 0 – 300. Default is 0. |
|
|
|
Example: The command to select the center margin value for booklet printing mode is “lp
— Outer Margin
The booklet mode outer margin can be selected using the following options.
Option Value | Alternate | Description |
| Value |
|
|
|
|
|
|
|
outermargin |
| Select the outer margin value for booklet printing mode. |
=value |
| This value specifies in pixels the Outer Margin or the “Creep” |
|
| per page, which should take place while printing a booklet. The |
|
| valid range for value is 0 – 18. Default is 0. |
|
|
|
Example: The command to select the outer margin value for booklet printing mode is “lp
— Orientation
The following orientation options are available.
Option Value | Alternate | Description |
| Value |
|
|
|
|
|
|
|
portrait |
| Print the document in portrait orientation. |
|
|
|
318 | Printing Guide — Printing from UNIX |
