Generating the Core

Generating the Core

This section provides detailed instructions for generating the Ethernet AVB Endpoint example design core.

To generate the core:

1.Start the CORE Generator™ tool.

For general help with starting and using CORE Generator software on your system, see the documentation supplied with the ISE software, including the CORE Generator Guide. These documents can be downloaded from: www.xilinx.com/support/software_manuals.htm

2.Create a new project.

3.For project options, select the following:

A Virtex®-6, Virtex-5, Spartan®-3, Spartan-3E, Spartan-3A/3A DSP or Spartan-6 device to generate the default Ethernet AVB Endpoint core.

In the Design Entry section, select VHDL or Verilog; then select Other for Vendor.

4.Locate the Ethernet AVB Endpoint core in the taxonomy tree, listed under one of the following:

Automotive & Industrial/Automotive

Communications & Networking/Ethernet

Communications & Networking/Networking

Communications & Networking/Telecommunications

5.Double-click the core name. A message may appear to indicate the limitations of the Simulation Only Evaluation license.

6.Click OK; the core customization screen appears.

Ethernet AVB Endpoint User Guide

www.xilinx.com

139

UG492 July 23, 2010

Page 139
Image 139
Xilinx UG492 manual Generating the Core