3Com 6416SW manual Ports, Disabling

Enabling

ATM

Ports

and

Interfaces

Before

you

can

use

the

devices

attached

to

the

ATM media

ports

in

the

6416SW,

you

must

enable

each port and configure

the type

of

interface

used

by the

port

to rec

and

transmit

ATM

data. For

example,

to

enable

port 2

(‘slot’ 1)

as

a

UNI

port:

￿ONcoreATM> set port 1.2 enable uni

[ENTER]

You can set a port to any of the ATM interfaces:

User-to-Network (UNI)

Switch-to-Switch (SSI)

Network-to-Network (NNI).

See “Network Interfaces” on page 3-6 for more information on ATM network interfaces.

Disabling		an	ATM	Port
You could			use	the	SET PORT command	to disable an ATM port that is connected to a
failing		device		as	follows:
	￿ONcoreATM> set port 1.2 disable					[ENTER]

5-15