3Com 6416SW manual Initialize, Cause, Cannot

ONcore	LEC	Cannot	Initialize		to	the	LES/BUS
Use the SHOW DEVICE command and look subnetat thelan emulation status
message:
Abnormal Termination:			LES	connection		cleared. ATM Forum			cause
xx:
The	LEC	automatically		tries		to	reconnect	to	the LES/BUS when the connection is lost. It
will	try	to reconnect			every		5 seconds,	5	times, and thereafter every 1 minute.
Cause	Code:	1

Explanation:

A

wrong

LES

address

was entered

using

the

SET

DEVICE

LAN_EMULATION_CLIENT command (

les_atm_address

parameter), or the port

attached

to

the

LES

is not

in

service.

Steps

to

Take:

1. Check

is

the

port UPstatus-OKAYis(via the SHOW PORT command), then check

that

the

LES ATM

address

is

exactly the

same

as

the

one entered in the ONcore.

Cause

Code:

3

Steps

to

Take:

If the LE server is in the same cluster (SSI links):

1.An SSI port has not enough bandwidth. Having several SSI ports on the module may reach the bandwidth limit. Spread the SSI ports over several modules.

2.The ATM address of an ONcore hub located on the PING path has been changed.

Disable the SSI link and re-enable it.

If the above does not solve the problem, take a TRS dump (with the DUMP TRS command), and contact your 3Com representative.

7-31