3Com 6416SW manual Unpacking the Module

Unpacking the Module

To unpack the 6416SW module, follow these steps:

1. Remove the 6416SW module from the shipping carton.

2.Remove the 6416SW module from the anti-static bag and inspect it for damage. Always handle the module by the faceplate being careful not to touch the internal components.

If		the		module	appears damaged, put it back		in the	anti-static		bag, and put the b
back into the shipping carton. Then contact your local 3Com dealer or 3Com
representative.
3Com	suggests that				you keep the shipping carton and the			anti-static shielding bag
which		your		6416SW	module was delivered in, in case you			later	want	to	repackage the
module		for		storage or		shipment.
3Com	also		suggests		that you record the serial number of			your	6416SW		module and
other information about the modules in your ONcore hub in								the	Hub	Planning Chart
provided			in	your	ONcore	Switching Hub Reference	Library.

2-2 ONcore ATM Switch/Control Module: Installation and User's Guide