ONcore

LEC

Cannot PING another

Client

and

Vice-versa

 

Steps

to

Take:

 

 

 

 

1. Check that the port of the

LEC is enabled. If it is

enabled, and not OKAY, then

problem comes from the

LEC

or

from the cable attached

to it.

2. The LEC does not support the same Ethernet type as the ONcore LEC.

Check that the LEC is emulating IEEE 802.3

Ethernet frames.

3. If the

ONcore

LEC and

the other LEC are not in the same IP subnet, there may be

a Gateway

definition problem.

Check the Default Gateway addresses in both machines. In general, they

correspond

to one

common

gateway.

7-28 ONcore ATM Switch/Control Module: Installation and User's Guide

Page 158
Image 158
3Com 6416SW manual Vice-versa, Cannot Ping another