3Com 6416SW manual How to Use This Guide

How	to	Use	This	Guide
This	guide	presents information on how to install and configure the 3Com
ONcore ATM		Switch/Control Module (Model Number 6414SW) in the
3Com	ONcore	Switching Hub. It describes		how to diagnose and solve

problems associated with the operation of the 6416SW module, and describes some of the principles of asynchronous transfer mode (ATM)

technology	on which	the	6416SW module			is	based.
This guide also describes how to					install		and	configure		a management
console for	the 6416SW		module. The		ATM	commands		that	you	enter at
the console to manage the ATM subsystem in the ONcore hub are
described	inONcorthe Switching			Hub, CELLplex		4000	Workgroup		Switch,
ATM Command Reference		Guide,		Document	Number:		17-00866.

Who Should Use this	Guide
This guide is	intended for the following people at your site:

ATM network administrator

ATM network operator

Hardware installer.

How to Use	this	Guide
This	guide	contains seven chapters and six appendixes:

Chapter 1, “Introduction to ATM” gives an overview of the main functions of the 6416SW module.

Chapter	2,	“Installation”		describes how		to install the 6416SW module	in
the	ONcore		hub.	It also	describes how to connect a console		to the
6416SW		module	in	order to	perform	configuration tasks.

How to Use This Guide xvii