3Com Before You Start, Entering 6416SW Commands, Command Reference Guide, Hub/CELLplex 4000

Before You Start

The following section describes keystrokes and the command syntax to use to enter 6416SW commands from a configuration console. For a complete description of all 6416SW configuration commands, seeONcorthe Switching Hub/CELLplex 4000 ATM

Command Reference Guide.

Entering 6416SW Commands

By entering commands at the prompt on the 6416SW configuration console, you can configure various functions of the 6416SW. The management prompt appears as follows:

￿ONcoreATM>

6416SW commands are not case-sensitive. The systemABCinterprets(uppercase) the same asabc (lowercase).

The	values you enter for			certainparameterscommand are, however, case-sensitive
and	must	be typed	exactly as ONcoreshown		Switchingt e	Hub/CELLplex	4000	ATM
Command Reference Guide. For				example, if youRWTRAPenterandrwtrap for the
com_name parameter in two				separate	SET COMMUNITY	commands,	you	will create two
different		community	names.

4-3