Chapter 5 Installing and Removing the Doors and Grille
Installing the Doors
Tip Observe that there is a guide pin on top of the knob latch.
Step 7 Keeping the knob latch at a shallow angle, align the securing pin and guide pin with the upper door mounting bracket.
Note You must align both the knob latch and the guide pin before the securing pin will drop properly.
Step 8 Pull the knob out, then drop the securing pin into the mounting bracket (see Step 3 in Figure
Step 9 To close the door, lift the latch button at the base of the door (see Figure
Figure 5-5 Lifting the Latch Button to Open the Door
LIFT | AND |
|
| PULL | |
|
|
LIFT | AND |
|
| PULL | |
|
|
210302
It will snap closed when the door’s magnets (on the inside top of the door) snap into place and the latching pin on the bottom of the door falls into the receiving holes on the striker panel (see Figure
Cisco
| ||
|
