Cisco Systems Cisco CRS-1 manual Removing the Doors

Chapter 5 Installing and Removing the Doors and Grille

Removing the Doors

Removing the Doors

To remove the doors from the Cisco CRS-1 4-slot line card chassis, follow these steps:

Step 1 Open the door you want to remove.

Step 2 While supporting the door with one hand, reach inside the door, pull out the knob latch, then lift the latch out from the upper door mounting bracket.

Step 3 With both hands grasping the door, lift the door out of the lower door mounting bracket. Step 4 Place the door in a safe storage box.

Step 5 Repeat this procedure for the other door.

Cisco CRS-1 Carrier Routing System 4-Slot Line Card Chassis Installation Guide

5-8 OL-10971-07