Delta Electronics VFD-M manual Parameter Explanation Settings Factory

Chapter 4 Parameters

Parameter	Explanation	Settings	Factory	Customer
			Setting
Pr.125	Source of PID Set	0.00 to 400.0Hz	0.00
	Point
Pr.126	PID Offset Level	1.0 to 50.0 %	10.0
Pr.127	Detection Time of PID	0.1 to 300.0 sec	5.0
	Offset
Pr.128	Minimum Reference	0.0 to 10.0 V	0.0
	Value
Pr.129	Maximum Reference	0.0 to 10.0 V	10.0
	Value
Pr.130	Invert Reference	00: Not inverted	00
	Signal AVI (0-10V)	01: Inverted
Pr.131	Minimum Reference	0.0 to 20.0mA	4.0
	Value (4-20mA)
Pr.132	Maximum Reference	0.0 to 20.0mA	20.0
	Value (4-20mA)
Pr.133	Invert Reference	00: Not inverted	00
	Signal (4-20mA)	01: Inverted
Pr.134	Analog Input Delay	00 to 9999 (per 2ms)	50
	Filter for Set Point
	Analog Input Delay	00 to 9999 (per 2ms)
Pr.135	Filter for Feedback		5
	Signal
Pr.136	Sleep Period	0.0 to 6550.0 sec	0.0
Pr.137	Sleep Frequency	0.00 to 400.0 Hz	0.00
Pr.138	Wake Up Frequency	0.00 to 400.0 Hz	0.00
Pr.139	Treatment for Counter	00: Continue operation	00
	Attained	01: Stop Immediately and display E.F.
	External Up/Down	00: Fixed Mode (keypad)
Pr.140		01: By Accel or Decel Time	00
	Selection	02: Reserved
Pr.141	Save Frequency Set	00: Not Save	01
	Point	01: Save
		00: Keypad Up/Down
Pr.142	Second Source of	01: AVI (0-10V)
		02: ACI (4-20mA)	00
	Frequency Command
		03: Communication
		04: Keypad potentiometer
		115V/230V: 370-450 Vdc	380.0
Pr.143	Software Braking
		460V: 740-900 Vdc	760.0
	Level
		575V: 925-1075 Vdc	950.0
Pr.144	Total operation time	Read Only
	(Day)

4-12 Revision May 2008, ME14, SW V3.04