Delta Electronics VFD-M manual Parameter, Explanation, Settings, Factory

			Chapter 4 Parameters
Parameter	Explanation	Settings		Factory	Customer
				Setting
Pr.145	Total operation time	Read Only
	(Minutes)
Pr.146	Line start Lockout	00: Disable		00
		01: Enable
Pr.147	Decimal Number of	00: One decimal		00
	Accel / Decel Time	01: Two decimals
Pr.148	Number of Motor	02 to 20		04
	Poles
Pr.149	Gear Ratio for Simple	4 to 1000		200
	Index Function
Pr.150	Index Angle for Simple	00.0 to 360.0		180.0
	Index Function
Pr.151	Deceleration Time for	0.00 to 100.00 sec		0.00
	Simple Index Function
Pr.152	Skip Frequency Width	0.00 to 400.0Hz		0.00
Pr.153	Bias Frequency Width	0.00 to 400.0Hz		0.00
Pr.154	Reserved
	Compensation	0.0: Disable
Pr.155	Coefficient for Motor	0.1 to 5.0 (recommended setting d2.0)		0.0
	Instability
Pr.156	Communication	0 to 200 (x500us)		0
	Response Delay Time
Pr.157	Communication Mode	0: Delta ASCII		1
	Selection	1: Modbus

Revision May 2008, ME14, SW V3.04 4-13