Delta Electronics VFD-M manual Parameter Explanation Settings Factory

		Chapter 4 Parameters
Parameter	Explanation	Settings	Factory	Customer
			Setting
Pr.08	Minimum Output Freq	0.10 to 20.00Hz	1.50
		115V/230V: 0.1 to 255.0V	10.0
Pr.09	Minimum Output
		460V: 0.1 to 510.0V	20.0
	Voltage
		575V: 0.1 to 637.0V	26.1
Pr.10	Acceleration Time 1	0.1 to 600.0 sec or 0.01 to 600.0 sec	10.0
Pr.11	Deceleration Time 1	0.1 to 600.0 sec or 0.01 to 600.0 sec	10.0
Pr.12	Acceleration Time 2	0.1 to 600.0 sec or 0.01 to 600.0 sec	10.0
Pr.13	Deceleration Time 2	0.1 to 600.0 sec or 0.01 to 600.0 sec	10.0
Pr.14	Accel S-curve	00 to 07	00
Pr.15	Jog Accel/Decel Time	0.1 to 600.0 sec or 0.01 to 600.0 sec	1.0
Pr.16	Jog Frequency	0.00 to 400.0 Hz	6.00
Pr.17	1st Step Speed Freq.	0.00 to 400.0Hz	0.00
Pr.18	2nd Step Speed Freq.	0.00 to 400.0Hz	0.00
Pr.19	3rd Step Speed Freq.	0.00 to 400.0Hz	0.00
Pr.20	4th Step Speed Freq.	0.00 to 400.0Hz	0.00
Pr.21	5th Step Speed Freq.	0.00 to 400.0Hz	0.00
Pr.22	6th Step Speed Freq.	0.00 to 400.0Hz	0.00
Pr.23	7th Step Speed Freq.	0.00 to 400.0Hz	0.00
Pr.24	Reverse Operation	00: Enable REV operation	00
	Inhibition	01: Disable REV operation
		00: Disable
Pr.25	Over-Voltage Stall	115V/230V: 330 to 450 Vdc	390
	Prevention	460V: 660 to 900 Vdc	780
		575V: 825 to 1025 Vdc	975
	Over-current Stall	00: Disable
Pr.26	Prevention during		150
		20% to 200%
	Acceleration
	Over-current Stall	00: Disable
Pr.27	Prevention during		150
		20% to 200%
	Operation
Pr.28	DC Braking Current	00 to 100 %	00
	Level
Pr.29	DC Braking during	0.0 to 5.0 sec	0.0
	Start-up

Revision May 2008, ME14, SW V3.04 4-3