Emerson Rosemount 8732 manual Damping

Rosemount 8732

Reference Manual

00809-0100-4665, Rev AA August 2010

	NOTE
	Be sure the calibration number reflects a calibration to a Rosemount
	reference transmitter. If the calibration number was generated by a means
	other than a certified Rosemount flow lab, accuracy of the system may be
	compromised.
	If your sensor is not a Rosemount sensor and was not calibrated at the
	Rosemount factory, contact your Rosemount representative for assistance.
	If your sensor is imprinted with an eight-digit number or a k-factor, check in
	the sensor wiring compartment for the sixteen-digit calibration number. If
	there is no serial number, contact the factory for a proper conversion.
Damping
	Adjustable between 0.0 and 256 seconds. This parameter is configured in the
	Transducer Block.
	Damping allows selection of a response time, in seconds, to a step change in
	flow rate. It is most often used to smooth fluctuations in output.

3-10