
Reference Manual
Rosemount 8732
Class 2 Masters
There are a number of available PROFIBUS configuration tools. These Class 2 Masters are
Class 2 Masters always need to be connected to the DP segment. They cannot be directly connected to a PA segment.
DIAGNOSTICS | Diagnostics are used to verify that the transmitter is functioning properly, to |
| assist in troubleshooting, to identify potential causes of error messages, and |
| to verify the health of the transmitter and sensor. All the diagnostic test can be |
| initiated through the use of a Class 2 Master. Some diagnostics can be |
| accessed using the LOI. |
| Rosemount offers several different diagnostic suites providing various |
| functionality. |
| Standard diagnostics included with every Rosemount 8732 transmitter are |
| Empty Pipe detection, Electronics Temperature monitoring, Coil Fault |
| detection, and various loop and transmitter tests. |
| Advanced diagnostics suite option one (D01 option) contains advanced |
| diagnostics for High Process Noise detection and Grounding and Wiring fault |
| detection. |
| Advanced diagnostics suite option two (D02 option) contains advanced |
| diagnostics for the 8714i Meter Verification. This diagnostic is used to verify |
| the accuracy and performance of the magnetic flow meter installation. |
| Empty Pipe Detection |
| Turn the empty pipe diagnostic on or off as required by the application. For |
| more details on the empty pipe diagnostic, see Appendix C: Diagnostics. |
| Electronics Temperature Out of Range |
| Turn the electronics temperature diagnostic on or off as required by the |
| application. For more details on the electronics temperature diagnostic, see |
| Appendix C: Diagnostics. |
| High Process Noise Detection |
| Turn the high process noise diagnostic on or off as required by the |
| application. For more details on the high process noise diagnostic, see |
| Appendix C: Diagnostics. |
| Grounding / Wiring Fault Detection |
| Turn the grounding / wiring diagnostic on or off as required by the application. |
| For more details on the grounding / wiring diagnostic, see Appendix C: |
| Diagnostics. |