Emerson Rosemount 8732 manual Reserved

Reference Manual

00809-0100-4665, Rev AA August 2010

Rosemount 8732

Totalizer Block

Totalize Block Parameter Attribute Definitions

Totalizer 1 is Slot 2 Totalizer 2 is Slot 3 Totalizer 3 is Slot 4

The 8732E transmitter has three independent totalizer blocks. These blocks can be used to totalize independently over different time ranges or using different units of measure.

The following table describes the parameters that are available in the totalizer (INTEG) block. Each line item in the table defines the element and specifies the requirements for each element.

Index	Parameter	Description
	Profibus PA Specific Block
	Header
16	BLOCK_OBJECT	This object contains the characteristics of the
		blocks.
17	ST_REV	The modification of at least one static parameter
		in a block has to be incremented by the
		according ST_REV at least by one.
18	TAG_DESC	Every block can be assigned a textual TAG
		description. The TAG_DESC must be
		unambiguous and unique in the fieldbus
		system.
19	STRATEGY	Grouping of Function Block. The STRATEGY
		field can be used to group blocks.
20	ALERT_KEY	This parameter contains the identification
		number of the plant unit. It helps to
		identify the location (plant unit) of an event.
21	TARGET_MODE	The TARGET_MODE parameter contains
		desired mode normally set by a control
		application or an operator. The modes are valid
		alternatively only, i.e. only one mode can be set
		at one time. A write access to this parameter
		with more then one mode is out of the range of
		the parameter and have to be refused.
22	MODE_BLK	This parameter contains the current mode, the
		permitted and normal mode of the block.
23	ALARM_SUM	This parameter contains the current states of
		the block alarms.
24	BATCH	This parameter is intended to be used in Batch
		applications. Not implemented in 8732E device.
25	RESERVED

3-5