Hitachi SJ300 Series Settings, Miscellaneous, Data, Code, Notes, Function, SRW Display, SRW Display, “B” Function, “B” Function, Resulting Non-displayed

3–37

	SJ300 Inverter
Miscellaneous	The miscellaneous settings include scaling factors, initialization modes, and others. This
Settings	section covers some of the most important settings you may need to configure.

	“B” Function		Run		Defaults
			Mode				Units	SRW Display
Func.			Edit	–FE	–FU	–FR
	Name	Description
Code			Lo Hi	(EU)	(US)	(JP)
B034	Run/power-on warning	Range is 0 to 65,530 hours	✘ ✔	0.	0.	0.	hrs.	>b034 TIME
	time							WARN	00000
B035	Rotational direction	Three option codes:	✘ ✘	00	00	00	—	>b035 LIMIT
	restriction	00 Enable for both dir.						F/R	FREE
		01 Enable for forward only
		02 Enable for reverse only
B036	Reduced voltage start	Seven option codes:	✘ ✔	06	06	06	—	>b036 RVS
	selection	00 Short						ADJUST	06
		01, 02, 03, 04, 05 (middle)
		06 Long
	Function Code Display Restriction – The inverter has the (optional) capability to suppress the
	display and editing of certain parameters. Use B037 to select the display options. The purpose
	of this feature is to hide particular secondary parameters that become unused or not applicable
	based on more fundamental parameter settings. For example, setting A001 = 01 configures the
	inverter to get its frequency command from the front keypad potentiometer. In this case, the
	inverter will not use the analog inputs nor their adjustment parameters for an external frequency
	command.

Parameters Drive Configuring

	“B” Function		Run		Defaults
			Mode				Units	SRW Display
Func.			Edit	–FE	–FU	–FR
	Name	Description
Code			Lo Hi	(EU)	(US)	(JP)
B037	Function code display	Three option codes:	✘ ✔	00	00	00	—	>b037 DISP
	restriction	00 Display all						Mode	ALL
		01 Display only utilized
		functions (see table
		below)
		02 Display user-selected
		functions only (con-
		figure with U01 to U12)

For example, you can set B037=01 to have the inverter suppress the displaying of all analog input parameters when A001=01, as shown in the first row of the following table.

Function	Data	Resulting Non-displayed	Notes
Code		Functions (when B37 = 01)
A001	01	A005, A006, A011 – A016,	[O], [OI], [O2] terminal
		A101 – A114, C081 – C083,	functions
		C121 – C123
A002	01, 03, 04,	B087	Stop key function
	05
A019	00	A028 – A035	Multi-speed function
C001 – C008	02, 03, 04,
	05