Hitachi SJ300 Series SRW Display, “U” Function

3–67

SJ300 Inverter

“U” Group: User-selectable Menu Functions

The user-selectable menu functions allow you to configure (select) any twelve of the other functions in the inverter and place them together in a convenient list. This feature provides quick access for the most-used functions needed for your application. Each U Group function can serve as a pointer to any of the other parameters. You do not have to use the Store key to retain each association; just scroll to the desired standard parameter for each U Group function and leave it. The setting can point to a monitor-only parameter (such as D001), or point to editable parameters (such as A001). In the case of pointing to an editable functions, you use the Up/Down keys to change the value and the Store key to accept the change into memory—the same procedure as a normal parameter edit.

		“U” Function		Run		Defaults
				Mode				Units		SRW Display
Func.				Edit	–FE	–FU	–FR
	Name		Description
Code				Lo Hi	(EU)	(US)	(JP)
U001				✘ ✔	no	no	no	—	>U001 USER
									1	no
U002				✘ ✔	no	no	no	—	>U002 USER
									2	no
U003				✘ ✔	no	no	no	—	>U003 USER
									3	no
U004				✘ ✔	no	no	no	—	>U004 USER
									4	no
U005				✘ ✔	no	no	no	—	>U005 USER
									5	no
U006				✘ ✔	no	no	no	—	>U006 USER
	User-selected function		“no” (disabled), or any of						6	no
U007			the functions D001 to P049	✘ ✔	no	no	no	—	>U007 USER
									7	no
U008				✘ ✔	no	no	no	—	>U008 USER
									8	no
U009				✘ ✔	no	no	no	—	>U009 USER
									9	no
U010				✘ ✔	no	no	no	—	>U010 USER
									10	no
U011				✘ ✔	no	no	no	—	>U011 USER
									11	no
U012				✘ ✔	no	no	no	—	>U012 USER
									12	no

Parameters Drive Configuring

TIP: Function B037 selects which parameter groups are displayed. If you want to limit the displayed parameters to only the U Group functions, set B037=02.