Hitachi SJ300 Series manual 126

3–58

“C” Group: Intelligent Terminal Functions

		“C” Function		Run		Defaults
				Mode				Units	SRW Display
	Func.			Edit	–FE	–FU	–FR
		Name	Description
	Code			Lo Hi	(EU)	(US)	(JP)
	C044	PID deviation level	Sets the PID loop error	✘ ✔	3.0	3.0	3.0	%	>C044 PID
		setting	threshold SP - PV						LEVEL	003.0%
			(absolute value) to trigger
			intelligent output [OD].
			Range is 0.0 to 100%,
			resolution is 0.1%
	C045	Frequency arrival	Range is 0.0 to 99.99 /	✘ ✔	0.00	0.00	0.00	Hz	>C045 ARV
		setting for acceleration	100.0 to 400.0 Hz						ACC2	0000.00Hz
		(2)
	C046	Frequency arrival	Range is 0.0 to 99.99 /	✘ ✔	0.00	0.00	0.00	Hz	>C046 ARV
		setting for deceleration	100.0 to 400.0 Hz						DEC2	0000.00Hz
		(2)
DriveConfiguring Parameters
	C055	Over-torque (forward-	Threshold for intelligent	✘ ✔	100.	100.	100.	%	>C055 OV-TRQ
		driving) level setting	output terminal [OTQ],						FW-V	100%
			quadrant I. Range is:
			0 to 200%, up to –550xxx;
			0 to 180%, –750 to 1500xxx
	C056	Over-torque (reverse	Threshold for intelligent	✘ ✔	100.	100.	100.	%	>C056 OV-TRQ
		regenerating) level	output terminal [OTQ],						RV-R	100%
		setting	quadrant II. Range is:
			0 to 200%, up to –550xxx;
			0 to 180%, –750 to 1500xxx
	C057	Over-torque (reverse	Threshold for intelligent	✘ ✔	100.	100.	100.	%	>C057 OV-TRQ
		driving) level setting	output terminal [OTQ],						RV-V	100%
			quadrant III. Range is:
			0 to 200%, up to –550xxx;
			0 to 180%, –750 to 1500xxx
	C058	Over-torque (forward	Threshold for intelligent	✘ ✔	100.	100.	100.	%	>C058 OV-TRQ
		regenerating) level	output terminal [OTQ],						FW-R	100%
		setting	quadrant IV. Range is:
			0 to 200%, up to –550xxx;
			0 to 180%, –750 to 1500xxx
	C061	Electronic thermal	Sets the threshold for intelli-	✘ ✔	80.	80.	80.	%	>C061 E-THM
		warning level setting	gent output [THM].						WARN	080%
			Range is 0 to 100%
	C062	Alarm code output	Allows binary alarm codes	✘ ✔	00	00	00	—	>C062 AL-CODE
			to be output to intelligent						SELECT	OFF
			terminals.
			Three option codes:
			00 Disable
			01 Enable – 3-bit code
			02 Enable – 4-bit code
	C063	Zero speed detection	Range is 0.00 to 99.99 /	✘ ✔	0.00	0.00	0.00	Hz	>C063 ZS
		level	100.0 Hz						LEVEL	000.00Hz