Hitachi SJ300 Series manual 276

C–8

Parameter Settings for Keypad Entry

		“B” Group Parameters		Default Setting		User
	Func.
		Name	-FE (Europe)	-FU (U.S.)	-FR (Japan)	Setting
	Code
	B023	Deceleration rate at overload restric-	1.0	1.0	1.0
		tion
	B024	Overload restriction operation mode	01	01	01
		(2)
	B025	Overload restriction setting (2)	Rated current x	Rated current x	Rated current x
			1.50	1.50	1.50
	B026	Deceleration rate at overload	1.00	1.00	1.00
		restriction (2)
	B031	Software lock mode selection	01	01	01
	B034	Run/power-on warning time	0.	0.	0.
C	B035	Rotational direction restriction	00	00	00
Appendix
	B036	Reduced voltage start selection	06	06	06
	B037	Function code display restriction	00	00	00
	B040	Torque limit selection	00	00	00
	B041	Torque limit (1) (forward-driving in	150.	150.	150.
		4-quadrant mode)
	B042	Torque limit (2) (reverse-regenerat-	150.	150.	150.
		ing in 4-quadrant mode)
	B043	Torque limit (3) (reverse-driving in	150.	150.	150.
		4-quadrant mode)
	B044	Torque limit (4) (forward-regenerat-	150.	150.	150.
		ing in 4-quadrant mode)
	B045	Torque limit LADSTOP enable	00	00	00
	B046	Reverse Run protection enable	00	00	00
	B050	Controller deceleration and stop on	00	00	00
		power loss
	B051	DC bus voltage trigger level during	0.0	0.0	0.0
		power loss
	B052	Over-voltage threshold during power	0.0	0.0	0.0
		loss
	B053	Deceleration time setting during	1.00	1.00	1.00
		power loss
	B054	Initial output frequency decrease	0.00	0.00	0.00
		during power loss
	B080	[AM] terminal analog meter adjust-	180	180	180
		ment
	B081	[FM] terminal analog meter adjust-	60	60	60
		ment
	B082	Start frequency adjustment	0.50	0.50	0.50
	B083	Carrier frequency setting	5.0	5.0	5.0