Hitachi SJ300 Series manual 116

3–48

“C” Group: Intelligent Terminal Functions

The input logic convention is programmable for each of the six inputs. Most inputs default to normally open (active high), but you can select normally closed (active low) in order to invert the sense of the logic.

Configuring Drive Parameters

	“C” Function		Run		Defaults
			Mode				Units	SRW Display
Func.			Edit	–FE	–FU	–FR
	Name	Description
Code			Lo Hi	(EU)	(US)	(JP)
C011	Terminal [1] active state		✘ ✔	00	00	00	—	>C011 IN-TM
								O/C-1	NO
C012	Terminal [2] active state		✘ ✔	00	00	00	—	>C012	IN-TM
								O/C-2	NO
C013	Terminal [3] active state		✘ ✔	00	00	00	—	>C013	IN-TM
								O/C-3	NO
C014	Terminal [4] active state		✘ ✔	00	00	00	—	>C014	IN-TM
		Select logic convention,						O/C-4	NO
C015	Terminal [5] active state	two option codes:	✘ ✔	00	00	00	—	>C015	IN-TM
		00 normally open N.O.						O/C-5	NO
C016	Terminal [6] active state	01 normally closed N.C.	✘ ✔	00	01	00	—	>C016	IN-TM
								O/C-6	NO
C017	Terminal [7] active state		✘ ✔	00	00	00	—	>C017	IN-TM
								O/C-7	NO
C018	Terminal [8] active state		✘ ✔	00	00	00	—	>C018	IN-TM
								O/C-8	NO
C019	Terminal [FW] active		✘ ✔	00	00	00	—	>C019	IN-TM
	state							O/C-FW	NO

NOTE: An input terminal configured for option code 18 ([RS] Reset command) cannot be configured for normally closed operation.