Hitachi SJ300 Series SRW Display, “P” Function

3–65

SJ300 Inverter

“P” Group: Expansion Card Functions

The two (optional) expansion cards for the SJ300 have associated configuration data. The following table defines the functions and their value ranges. Please refer to the expansion card manual for more details.

	“P” Function			Run		Defaults
				Mode				Units	SRW Display
Func.				Edit	–FE	–FU	–FR
	Name		Description
Code				Lo Hi	(EU)	(US)	(JP)
P001	Operation mode on	Two option codes:		✘ ✔	00	00	00	—	>P001 OPTION1
	expansion card 1 error	00	Trip (stop motor)						SELECT	TRP
		01	Continuous operation
P002	Operation mode on	Two option codes:		✘ ✔	00	00	00	—	>P002 OPTION2
	expansion card 2 error	00	Trip (stop motor)						SELECT	TRP
		01	Continuous operation
P010	Feedback option enable	Two option codes:		✘ ✘	00	00	00	—	>P010 FEEDBACK
		00	Disable						SELECT	OFF
		01	Enable
P011	Encoder pulse-per-	Range is 128 to 65000		✘ ✘	1024	1024	1024	pulse	>P011 FEEDBACK
	revolution (PPR) setting	pulses per revolution							ENC-P	01024pls
P012	Control pulse setting	Selects between automatic		✘ ✘	00	00	00	—	>P012 FEEDBACK
		speed regulation (ASR) and							CONTROL	ASR
		automatic position regula-
		tion (APR) modes.
		Two option codes:
		00	ASR mode
		01	APR mode
P013	Pulse input mode setting	Pulse input mode setting.		✘ ✘	00	00	00	—	>P013 FEEDBACK
		Three option codes:							PULSE	MD0
		00	quadrature
		01	count and direction
		02	separate forward and
			reverse pulse trains
P014	Home search stop	Range is 0 to 4095 pulses		✘ ✔	0.	0.	0.	—	>P014 FEEDBACK
	position setting								POS	0000pls
P015	Home search speed	Range is 0.00 to 99.99 /		✘ ✔	5.00	5.00	5.00	Hz	>P015 FEEDBACK
	setting	100.0 to 120.0Hz							FC	005.00Hz
P016	Home search direction	Two option codes:		✘ ✘	00	00	00	—	>P016 FEEDBACK
	setting	00	Forward						TURN	FW
		01	Reverse
P017	Home search comple-	Range is 0 to 10,000 pulses		✘ ✔	5	5	5	pulse	>P017 FEEDBACK
	tion range setting								L	00005pls
P018	Home search comple-	Range is 0.00 to 9.99		✘ ✔	0.00	0.00	0.00	sec.	>P018 FEEDBACK
	tion delay time setting	seconds							TW	000.00s
P019	Electronic gear set	Two option codes:		✘ ✔	00	00	00	—	>P019 FEEDBACK
	position selection	00	Position feedback side						EGRP	FB
		01	Position command side
P020	Electronic gear ratio	Range is 1 to 9999		✘ ✔	1.	1.	1.	—	>P020 FEEDBACK
	numerator setting								EGR-N	00001
P021	Electronic gear ratio	Range is 1 to 9999		✘ ✔	1.	1.	1.	—	>P021 FEEDBACK
	denominator setting								EGR-D	00001

Parameters Drive Configuring