Discovering Sun StorEdge 3510 Storage Systems
Before you can discover a Sun StorEdge 3510 storage system, you must set up a Sun StorEdge 3510
The Sun StorEdge Configuration Service can be installed in one of the following locations:
•On the same computer as the Sun StorEdge 3510
•On a separate computer
To install the Sun StorEdge Configuration Service you must install the following packages:
•Sun StorEdge Configuration Service Console (SUNWscsu)
•Sun StorEdge Configuration Service Agent (SUNWscsd)
•Sun StorEdge Diagnostic Reporter Agent (SUNWscsa)
You must also install the following packages. Contact Sun technical support for information on how to obtain and configure these packages.
•WBEM Solutions J WBEM Server 1.0
•Sun StorEdge CIM/WBEM Provider SDK (SUNWagsdk package) - Follow the instructions in the readme file that is installed with the SUNWagsdk package.
•Sun StorEdge 3510
IMPORTANT: The management server is unable to display logical volumes configured on Sun StorEdge 3510 storage systems. Any logical volumes as well as the logical drives that comprise them will not appear in the UI. There will be no indication that this happened.
Discovery Information for Sun StorEdge 3510 Storage Systems
To discover an Sun StorEdge 3510, enter the following information in HP SIM:
•IP address or system name of the system running the Sun StorEdge 3510
•User name of the system running the Sun StorEdge 3510
•Password of the system running the Sun StorEdge 3510
Discovering Sun StorEdge 6920 and 6940 Storage Systems
To discover an Sun StorEdge 6920 or 6940 storage system, enter the following information in HP SIM:
•IP address or system name of the storage system you want to discover.
•User name of the storage system you want to discover.
•Password of the storage system you want to discover.
Discovering Sun StorEdge 6130 Storage Systems
To discover an Sun StorEdge 6130 storage system, enter the following information in HP SIM:
62 Discovering Switches, Storage Systems, NAS Devices, and Tape Libraries