4.Click Close to return to the Advanced page.
5.Paste the copied text into the Custom Properties box.
6.Make your SNMP trap listener port or SNMP trap community string change in the Custom Properties box. Remove the pound (#) symbol in front of the property to make sure it is not commented out. For example: cimom.snmpTrapListenerPort=162.
7.Click Save.
Discovering Storage SystemsUse the workflow in ”Discovering Elements” on page 27 to discover storage systems. This section provides information about supported storage systems, including the information to enter in HP SIM during the discovery process. For more information on device support, see the support matrix. The support matrix is accessible from the Documentation Center (Help > Documentation Center in HP Storage Essentials).
Table 7 Discovery Requirements for Storage Systems
Element | Discovery Requirements | For Additional Information |
|
|
|
3PAR storage | Discover the 3PAR storage system | |
systems | directly. | |
|
|
|
EMC CLARiiON | The EMC Navisphere CLI is | |
storage systems | required for the management server | |
| to communicate with the CLARiiON |
|
| storage system. |
|
|
|
|
EMC Symmetrix | Discover the server running the | |
storage system | EMC Solutions Enabler. | |
(Including EMC |
|
|
Symmetrix DMX |
|
|
storage systems) |
|
|
|
|
|
LSI storage systems | Can be discovered two ways: | |
| • Entering the IP address/DNS | |
|
| |
| name, user name and password |
|
| of a controller for an LSI storage |
|
| system. Discovers only the |
|
| corresponding IP address of the |
|
| controller. |
|
| • Entering the IP address/DNS |
|
| name, user name and password |
|
| of a proxy that is used to |
|
| manage an LSI storage system. |
|
| Discovers all controllers known |
|
| to the proxy. |
|
|
|
|
HDS storage | Discover the server running | |
systems | HiCommand Device Manager. | |
|
|
|
HP Storage Essentials SRM 6.0 User Guide 47