2.On the View Logs page, click the Click here portion of the following message:

Click here if you wish to stop getting details.

3.When you are asked if you are sure you want to stop Discovery Data Collection, click OK. The management server stops Discovery Data Collection.

NOTE: Existing operations will finish before the management server stops Discovery Data Collection.

4.Schedule a time to resume Discovery Data Collection.

Other Discovery Features

This section contains the following topics:

•Selective Discovery Filter, page 69

•Discovering a Single Element using the Manual Tab, page 72

•Changing Credentials for Discovery, page 73

•Saving Discovery Settings to a Hosts File, page 73

•Viewing Log Messages, page 74

•Viewing the Status of System Tasks, page 75

•Using Discovery Groups, page 76

•Deleting Discovered Elements, page 78

•Working with Quarantined Elements, page 80

•Updating the Database with Element Changes, page 81

Selective Discovery Filter

The selective discovery filter allows you to filter the devices that are passed from HP SIM to HP Storage Essentials for discovery operations. The filter is a file that contains a list of IP addresses that should (or should not) be passed to HP Storage Essentials. The filter does not affect device discovery operations in HP SIM, it only restricts the data that is passed from HP SIM to HP Storage Essentials. The filter examines each device HP SIM discovers before passing the discovery information to HP Storage Essentials. In the case of multi-homed devices, the filter operation uses all reported IP addresses for a given device in deciding whether or not to pass data to HP Storage Essentials.

The selective discovery filter file is called SEDiscoveryFilterList (with no file extension). The file resides in:

•<HP SIM install directory>/config on Windows

•/etc/opt/mx/config on Linux

A sample file called SEDiscoveryFilterList.sample is available.

HP Storage Essentials SRM 6.0 User Guide 69