2.In the right pane, click the Storage Systems tab.

3.Click the Provision button for the storage system for which you want to access host security group information.

4.Click Step 3 Host Security Group.

To access host security groups from System Manager:

1.Double-click a storage system in System Manager.

2.Click Host Security Groups in the Navigation tab.

This page lists the following information about host security groups:

NOTE: The following two features are only available when accessed from Provisioning Manager.

•View all host security groups - Click the All category in the tree. All the host security groups appear in the right pane.

•View only host security groups assigned to a certain port - Click a port in the tree. The host security group assigned to the port appears in the right pane.

The following information is available on this page:

•Port (If applicable) - Displays the port associated with the host security group.

NOTE: You can filter the list of ports so that the information for only one port is displayed.

To filter the list of ports: Click +Filter, select the port that you would like to view, and click Apply. Only the information for the selected port is displayed in the table below.

•Name - Displays the name of the host security group.

•Initiators - Displays one of the following:

•The caption for the discovered port if the port has been discovered by the management server (for example Columbia:Adapter0 Port 0). A tool tip over the caption gives the full WWN.

•The WWN if the port has not been discovered.

•Volumes - Displays the volumes in the host security group.

•Host Mode - Displays the port settings for your operational environment. The settings for the host mode vary by the model of the HDS storage system. With some hardware, you must select a special host mode on the port for the storage system to enable certain servers and HBAs to “see” the LUNs on the port. Refer to your documentation for the HDS storage system.

•Host Mode 2 (If applicable) - Displays optional settings on the port that describe how the host accesses the port. Multiple options exist. For more information, see you documentation for HDS storage system.

If the table contains more than 10 entries, the following buttons for navigating through the table are enabled:

• - Move to the first page.

HP Storage Essentials SRM 6.0 User Guide 557