NOTE: Events listed in Event Manager may not be attributed to the correct source until Discovery Data Collection has completed.
Clearing EventsIf you have already reviewed an event, you might want to mark it as “cleared” so you can keep track of which events you have already reviewed.
To clear events, do one of the following:
•To clear an event - Click the Not cleared text for the event. Notice that the text turns red, as shown in the following figure:
Figure 68 Clearing an event
•To clear several events - Select the events and then click Clear Selected.
•To clear all events - Click Clear All.
When events are cleared, a clear icon (
) appears in the Cleared column for the event.
Depending on the severity of an event, the management server may mark the event as clear after 60 minutes. Events designated as Major and Critical are never marked as clear. You can change the time delay in clearing an event, and you can specify that the management server never mark an event as clear.
To help you in filtering events, you may want to have unimportant events marked as cleared rather than automatically deleted. Depending on how you have configured the deletion of events, you can view the cleared events at a later time.
See the following table for the default settings for clearing events. Table 48 Default Settings for Clearing Events
Severity Level | Default Time Delay to Clear the Event |
| (Hours) |
|
|
Unknown | 1 |
|
|
Informational | 1 |
|
|
Warning | 1 |
|
|
Minor | 1 |
|
|
HP Storage Essentials SRM 6.0 User Guide 337