1.Use a text editor to create a file named SEDiscoveryFilterList (with no file extension), or make a copy of the sample file (SEDiscoveryFilterList.sample) and rename the file to

SEDiscoveryFilterList.

NOTE: The sample file is located in <HP SIM install directory>/config on Windows and /opt/mx/config on Linux.

2.To create an inclusive filter, enter inclusive in the file, and then add IP addresses, ranges, or patterns (one per line). Be sure to include all IP addresses that should be passed to HP Storage Essentials. For a sample file, see ”Editing Rules for the Selective Discovery Filter” on page 69.

3.To create an exclusive filter, enter exclusive in the file, and then add IP addresses, ranges, or patterns (one per line). Be sure to include all IP addresses that should not be passed to HP Storage Essentials.

NOTE: When entering filters, follow the ”Editing Rules for the Selective Discovery Filter” on page 69.

4.Save the file in the following directory on the HP SIM management server.

•Windows: <HP SIM install directory>/config

•Linux: /etc/opt/mx/config

Discovering a Single Element using the Manual Tab

IMPORTANT: When HP Storage Essentials is integrated with HP SIM, running discovery from the Automatic tab provides the best feedback for HP Storage Essentials discovery. For instructions on discovering elements from the Automatic tab, see ”Discovering Elements” on page 27.

You can use the Manual tab to add a single element that HP SIM has not yet discovered. If you use this method, there is no direct feedback on the status of the HP SIM and HP Storage Essentials operations that take place during discovery. To view HP SIM progress, however, you can check the relevant collection in the user interface.

To discover a single element using the Manual tab:

1.Select Options > Discovery, and then click the Manual tab.

2.Enter the system name or IP address. Simple or fully qualified domain name (FQDN) host names can be entered. However, ranges of host names are not allowed.

3.If you have not entered the WBEM credentials for this system previously, click More Settings, and then enter the credentials in the WBEM Settings section. For information on credentials, see ”Using Credentials” on page 22.

4.Click Add System to add the system to the database. HP SIM starts the discovery process.

72 Discovering Switches, Storage Systems, NAS Devices, and Tape Libraries