NOTE: To select all of the ports, select the check box next to the Port heading.

7.Click OK.

Deleting a Zone Alias

You cannot delete a zone alias if it is the only member in a zone.

To delete a zone alias:

1.Click Tools > Storage Essentials > Provisioning Manager in HP Systems Insight Manager.

2.In the right pane, click the SAN Zoning tab.

3.Click the Provision button for the fabric in which you want to delete a zone alias.

4.Click Step 1 Zone Alias.

5.Click the Delete () button for the zone alias you want to delete.

6.When you are asked if you want to delete the zone alias, click OK.

Accessing Information About Zoning

Keep in mind the following:

•For more information about which zoning features are supported for your switches, see Table 134 on page 521.

•Cisco SMI-S Switch Connections only: Zone that are part of an active zone set are listed multiple times for each switch in the virtual SAN. When a zone set is activated, the zone is copied to each switch in the virtual SAN. The zone is then listed twice (active and non-active versions) for each switch.

To access information about zones and to manage them:

1.Click Tools > Storage Essentials > Provisioning Manager in HP Systems Insight Manager.

2.In the right pane, click the SAN Zoning tab.

3.Click the Provision button for the fabric in which you want to access information about zoning.

4.Click Step 2 Zone.

This page lists the zones, their aliases and ports under the following columns:

•Name - Click the name of the zone to view its properties. Keep in mind the following:

•(Cisco SMI-S Switches) The management server prefixes the names of zones on Cisco switches with the name of the Virtual SAN and the switch the zones reside on. For example, assume you have the name VSANNAME:cisco1:ZoneName displayed under the Name column. VSANNAME is the name of the virtual SAN in which the zone was created, cisco1 is the name of the switch containing the zone, and ZoneName is the name the user assigned to the zone.

•(QLogic SMI-S switches) The management server prefixes the names of zones on QLogic switches with the name of the switch. For example, assume you have the name

526 Provisioning Manager