Deleting Discovered Elements
To remove a discovered element completely you must delete it from both HP SIM and HP Storage Essentials. If you do not do this, the deleted element can reappear under the following circumstances:
•If a scheduled automatic discovery task includes the deleted element, HP SIM will rediscover it during the next discovery.
•If HP Storage Essentials still lists the access point for the element, HP Storage Essentials rediscovers the element during the next Discovery Data Collection.
You must determine the access points for the element you want to delete. In the following figure QBrocade2 is accessed by two switches: 192.168.10.25 and 198.168.10.22. You must delete both access points to completely remove the element. As a result, the QBrocade5 switch will also be removed because it has the same access points as QBrocade2.
Figure 10 Deleting Discovered Elements from the Management Server
NOTE: If HP Storage Essentials and HP SIM are installed on the same computer, you cannot delete the HP Storage Essentials management server from HP SIM.
Removing an Element
1.Click All Systems in the System and Event Collections pane on the HP SIM home page, click Systems in the left pane.
2.Select the elements you want to delete.
3.Click Delete.
4.If the element is part of an HP SIM automatic discovery task, remove it from the task.
5.Select Options > Storage Essentials > Discovery > Run Discovery Data Collection.
6.Select the element you want to delete, and click Delete.
7.Select Tools > Storage Essentials > Home
8.Click Discovery and then click Setup.
9.Select the element you want to delete, and click Delete.
Deleting a single element from an access point
To delete an element using System Manager or Chargeback Manager:
1.Do one of the following:
• In System
HP Storage Essentials SRM 6.0 User Guide 79