If you do not see information in your reports, verify that you have global reporting set up correctly. See ”Setting Up Global Reporter” on page 209.

To filter data global reports:

1.Access Reporter as described in ”Accessing Reporter” on page 435.

2.Expand the Global node.

3.Select a global report.

4.In the right pane, click Filter Data.

5.Expand the Sites and Organizations node.

6.In the Filtering window, select the sites you want to view.

7.Expand the node of each selected site to view its organizations.

8.Select the organizations containing the elements you want to view. To view all organizations at a site, select the Everything option.

9.Click OK.

The filter is applied to all global reports.

Sending a Report by E-mail

You can e-mail an attached report in PDF, XML or Microsoft Excel format. To send reports by e-mail on a regular basis, set up an e-mail schedule for the report, as described in ”Adding an E-mail Schedule for a Report” on page 440.

Keep in mind the following:

•Before you can e-mail a report, you must set up e-mail notification, as described in the topic, ”Setting Up E-mail Notification” on page 178.

•The elements in the report you send are based on your organizations and which organizations are selected in the organization filter at the top of the page.

•Send your reports soon after a report cache refresh, which occurs every six hours by default. Since the reports display the data that is in the cache, e-mails sent too long after a refresh will show old data. See ”Scheduling a Report Cache Refresh” on page 209.

To send a report by e-mail:

1.Access Reporter as described in ”Accessing Reporter” on page 435.

2.Expand the tree in the middle pane, and click the report you want to send by e-mail.

3.Click E-mail this Report.

You are told the e-mail server is not enabled if you have not set up e-mail notification. You must set up e-mail notification before you can send e-mail a report. See ”Setting Up E-mail Notification” on page 178.

4.In the top box, enter the recipient's e-mail address.

The software verifies the address entered has a correct form. To send multiple addresses, separate each address with a comma (,); for example:

john.example@appiq.com,jerry.example@appiq.com

HP Storage Essentials SRM 6.0 User Guide 439