Table 162 Known Device Issues (continued)
Device | Software | Description |
|
|
|
Solaris host | VxVM | If you discover a host with any typical SAN disk groups off |
|
| line, the storage volume page shows SAN mount points as |
|
| local instead of external. These disks, however, are not |
|
| accessible. |
|
| When you perform Discovery Data Collection with all disk |
|
| groups online, disks on the SAN are shown as external. Hosts |
|
| connected directly to a storage system are shown as local, |
|
| except for hosts connected by fibre. Hosts connected directly to |
|
| a storage system through fiber are shown as external. |
|
|
|
Windows host | VxVM | When a Windows host with VxVM is used, the SCSI bus |
|
| number is always reported to be 1 in the SCSI bus column of |
|
| the Disk Drives page. |
|
|
|
Any host | NA | The Unmounted Volume box under Capacity Summary |
|
| automatically displays 0 MB if you discovered the host but not |
|
| the storage system connected to it. This may occur if you did |
|
| not enter the IP address of the storage system when performing |
|
| discovery, or if your license does not allow you to discover a |
|
| particular storage system. See the support matrix for Standard |
|
| or Enterprise Edition to determine which storage systems you |
|
| can discover. The List of Features is accessible from the |
|
| Documentation Center (Help > Documentation Center in |
|
| Storage Essentials). |
|
|
|
HP Storage Essentials SRM 6.0 User Guide 725