Accessing the Navigation Tab

To access the Navigation tab:

1.Access the management server.

2.To access the Navigation tab, do one of the following:

•Click an element in Application Viewer.

•Double-click an element in Capacity Manager, Performance Manager, or System Manager.

•Click one of the following elements in Backup Manager, and then click Navigation in the lower-right corner.

•Backup Client

•Backup Library

•Host

•Master backup server

•Master backup media

3.Click the Navigation tab. (This is not necessary if you accessed the Navigation tab from Backup Manager.)

Viewing Element Properties

This section contains the following topics:

•About the Properties Tab, page 307

•Accessing the Properties Tab, page 308

•Viewing Fabric Properties, page 308

•Assigning a Custom Name, page 309

About the Properties Tab

The Properties tab provides detailed information about an element. Since the information obtained from each type of element varies, the Properties tab displays only information relevant to that type of element. For example, the Properties tab for fabrics lists the zones, zone sets, switches, and zone aliases, as compared to the Properties tab for a host, which lists the processors, cards, applications, and storage volumes the host uses. For supported Brocade switches, trunking ISL ports have Trunking State set to 2, and non-trunking ISL ports have Trunking State set to 1.

See ”Viewing Fabric Properties” on page 308 for more information about the Properties tab for fabrics.

The Properties tab usually provides the following, although this list does vary from element to element:

•Assign a Custom Name - To make it easier to identify the element, assign the element a custom name. See the topic, ”Assigning a Custom Name” on page 309. This option is not available to all elements.

•IP Address (Generic Hosts Only) - Enter an IP address for a generic host.

•DNS Name (Generic Hosts Only) - Enter a DNS name for a generic host.

308 Viewing Element Topology and Properties