Lucent Technologies Release 3 Version 8 manual Adding a Second Packet Interface

Administering the Switch for CMS High Availability Systems	CentreVu CMS R3V8 High Availability
Connectivity, Upgrade and Administration
Administering the Definity Switch	4-8

Adding a Second Packet Interface

This procedure is required only for Definity G3csi switches.

Use the Maintenance-Related System Parameters form to add a second packet interface to the G3csi switch. This is required for CMS computer connectivity.

change system-parameter maintenance		Page 2 of X
	MAINTENANCE-RELATED SYSTEM PARAMETERS
MINIMUM MAINTENANCE THRESHOLDS ( Before Notification )
TTRs: 4	CPTRs: 1	Call Classifier Ports:
MMIs: 0	VCs:
TERMINATING TRUNK TRANSMISSION TEST (Extension)
Test Type 100:	Test Type 102:	Test Type 105:
ISDN MAINTENANCE
ISDN-PRI TEST CALL Extension:		ISDN BRI Service SPID:

DS1 MAINTENANCE
DSO Loop-Around Test Call		Extension:
LOSS PLAN (Leave Blank if no		Extra Loss	is Required)
Minimum Number of	Parties	in a Conference Before Adding Extra Loss:
SPE OPTIONAL BOARDS
Packet	Intf1? y	Packet Intf2? y
Bus Bridge: 01A03	Inter-Board Link		Timeslots Pt0: 6 Pt1: 1 Pt2: 1