Lucent Technologies Release 3 Version 8 Setting Up CMS on an HA Server, Overview Prerequisites

Upgrading CMS to the High Availability Option	CentreVu CMS R3V8 High Availability
	Connectivity, Upgrade and Administration
Setting Up CMS on an HA Server	3-14

c.Enter the device path for the tape drive, for example:

/dev/rmt/0c

The system displays a list of ACD(s) backed up on the volume and prompts:

Enter l to list the tables or v to also

verify the volume:

d.Enter: l

The system displays a list of the database tables included on the backup.

Setting Up CMS on an HA Server

Overview

Prerequisites

This section refers to procedures which apply to both the new HA server purchased by the customer and the original server (after it has been upgraded with new disk drives supplied by a Lucent Speed Centre facility).

TSC personnel verify authorizations, set up data storage parameters, and set up the CMS application remotely. On-site technicians should call the TSC to coordinate this process.

The TSC should verify that the on-site technicians have completed the following tasks:

•Connected the console to the CMS computer

•Connected the CMS computer to the TSC’s Remote Maintenance Center (remote console)

•Connected additional terminals and printers to the NTS ports.

•Connected the link between the CMS computer and the switch

NOTE

If the hardware link or the Automatic Call Distribution (ACD) feature and CMS are not properly administered, the CMS software cannot communicate with the switch. For switch administration procedures, see “Administering the Switch for CMS High Availability Systems” on Page 4-1.