Administering the Switch for CMS High Availability Systems | CentreVu CMS R3V8 High Availability |
| |
| Connectivity, Upgrade and Administration |
| |
Administering the Definity Switch |
| ||
|
|
|
|
Field | Definition |
|
|
|
|
Network regions are | Enter n. This application is not used for |
interconnected |
|
|
|
Enabled | Enter y to enable the |
| After initial administration, you must disable |
| the interface before you make any changes. |
|
|
Type | Enter |
|
|
Slot | Enter the equipment location of the |
| circuit pack. |
|
|
Code/Sfx | This is a |
| designation number of the circuit pack |
| installed in the specified slot. |
|
|
Node Name | Enter the switch node name assigned on |
| Pages 2 through 6 of the Node Names form. |
| In this example, enter switchhost. The |
| same node name cannot be assigned to two |
| different IP interfaces. |
|
|
Subnet Mask | Identifies which portion of an IP address is a |
| network address and which is a host |
| identifier. Use the default entry, or check with |
| the LAN administrator on site if connecting |
| through the customer’s LAN. |
|
|
Gateway Address | If the application goes to points off the |
| subnet, a Gateway Address of the router is |
| required; if the switch and the CMS server |
| are on the same subnet, a Gateway address |
| if not required. |
| If required, enter the address of a network |
| node that will serve as the default gateway |
| for the IP interface. If using ethernet only, |
| and a Gateway Address is administered, no |
| IP routes are required. |
|
|
Net Rgn | For a |
|
|
