Lucent Technologies Release 3 Version 8 Upgrading CMS to the High Availability Option

Upgrading CMS to the High Availability Option CentreVu CMS R3V8 High Availability
Connectivity, Upgrade and Administration
Setting Up CMS on an HA Server 3-39
.
# Enter a name for this UNIX system (up to 256 characters):
cms3
# Select the type of backup device you are using
# 1) SCSI QIC-150 cartridge tape - 150MB tape
# 2) 40.0 Gbyte 8mm tape
# 3) 14.0 Gbyte 8mm tape
# 4) 5.0 Gbyte 8mm tape
# 5) SCSI QIC-2.5 cartridge tape - 2.5GB tape
# 6) SCSI 4-8 SLR cartridge tape - 4GB tape 8GB compressed)
# Enter choice (1-6):
5
# Default backup device paths based on device type:
# Device Default backup path
# SCSI QIC-150 cartridge tape - 150MB tape /dev/rmt/0
# 40.0 Gbyte 8mm tape /dev/rmt/0c
# 14.0 Gbyte 8mm tape /dev/rmt/0c
# 5.0 Gbyte 8mm tape /dev/rmt/0
# SCSI QIC-2.5 cartridge tape - 2.5GB tape /dev/rmt/0c
# SCSI 4-8 SLR cartridge tape - 4GB tape (8GB compressed)
/dev/rmt/0c
# Enter the default backup device path:
/dev/rmt/0c
# Enter number of ACDs being administered (1-8):
3
# The following information is required per ACD:
# Information for ACD 1:
# Enter switch name (up to 20 characters):
# Select the model of switch for this ACD
# 1) Definity-G3V2
# 2) Definity-G3V3
# 3) Definity-G3V4
# 4) Definity-G3V5
# 5) Definity-R6/R7
# 6) Definity-R8
# Enter choice (1-6):
6
# Is Vectoring enabled on the switch? (y/n):
y
# Is Expert Agent Selection enabled on the switch? (y/n):
y
# Does the Central Office have disconnect supervision? (y/n):
y
# If the Central Office has disconnect supervision, enter 0.
# Otherwise, ACD calls shorter than the Phantom Abandon |
# Call Timer value will be counted as abandoned.
# Enter the Phantom Abandon Call Timer value in seconds (0-10):
0
# Enter the local port assigned to switch (1-64):
1
# Enter the remote port assigned to switch (1-64):
1