Lucent Technologies Release 3 Version 8 Migrating CMS Historical Data to the New HA Server

Upgrading CMS to the High Availability Option CentreVu CMS R3V8 High Availability
Connectivity, Upgrade and Administration
Migrating CMS Historical Data to the New HA Server 3-69
Migrating CMS Historical Data to the New HA Server 3
After the switch is re-administered for R3V8 and the HA dual C-LAN
option and CMS data collection is started on the new HA server, migrate
CMS historical data to the new HA server.
Procedure 3This procedure migrates CMS historical data from the second
incremental maintenance backup (“Performing an Incremental
Maintenance Backup” on Page 3-67) onto the new HA server.
Attempting to migrate CMS data more than once may cause catastrophic
errors from which recovery is difficult. Before a re-migration of data can
be performed, CMS must be turned off and a second setup of the CMS
software must be performed.
1. Install the incremental maintenance backup tape (which contains
incremental historical data) into the tape drive on the new HA server.
2. Select the System Setup -> R3 Migrate Data option from the
CMS main menu.
The System Setup: R3 Migrate Data window is displayed.
3. Select Historical data as the the data type, and specify All
ACDs for migration, as shown in the following example:
4. Press Enter to access the action list in the top right corner of the
window.
5. Select the Run option and press Enter.
!WARNING:
x