Lucent Technologies Release 3 Version 8 manual Overview

Connecting HA Servers to the Switch	CentreVu CMS R3V8 High Availability
	Connectivity, Upgrade and Administration
Overview	2-4

c.Direct connect to Customer LAN, without private segment:

—Least preferred option

—Complete dependency on performance and reliability of customer’s LAN

—Allows remote location of endpoints when customer LAN connectivity is convenient

—Customer LAN administrator must be present during setup

•If option b or c is chosen, the following information is needed from the customer:

a.Customer network physical connectivity questions:

—Location of 10BaseT network access point (hub, router, and so on)

—Distance between C-LAN and network access point (328 ft, 100 m maximum)

—Wiring to access point, existing or new, Category 5 minimum required

b.Customer network administration questions:

—IP address of C-LANs, adjuncts, and gateways

—Node names of C-LANs, adjuncts, and gateways

—Subnet masks for all LAN segments containing C-LANs or adjuncts

—Gateway IP address for all LAN segments containing C- LANs, adjuncts, or routers

—Are all endpoints (C-LANs and adjuncts) on the same local LAN segment?

Network administration information needs to be mapped into specific administration fields.

•Sanity check of information obtained from customer:

a.If C-LAN and adjuncts (CMS or Intuity) are on the same LAN segment:

—Gateway IP address (if present) and subnet mask information is valid

—All IP addresses contain the same subnet address

b.If C-LAN and adjuncts are on different LAN segments, gateway IP addresses are different

Without the information described above, the Lucent Technologies technician will be unable to complete the installation.