Lucent Technologies Release 3 Version 8 - page 81

Upgrading CMS to the High Availability Option CentreVu CMS R3V8 High Availability
Connectivity, Upgrade and Administration
Setting Up the NTS 3-61
The program responds:
5. Enter 1 to erase EEPROM. The program responds:
6. Enter y. The program responds:
7. Repeat Steps 4 through 6, but select 2 (FLASH) to erase the
FLASH information.
8. After you have completed the erase command, enter addr. The
program responds:
9. Enter the IP address for this NTS. The program responds:
Erase
1) EEPROM (i.e., Configuration Information)
2) FLASH (i.e., Self Boot Image)
Enter 1 or 2::
Erase all non-volatile EEPROM memory? (y/n) [n]::
Erasing xxxx bytes of non-volatile memory. Please wait....
...............................
Erased xxxx bytes of non-volatile memory complete.
Monitor::
Enter Internet address [<uninitialized>]::
Internet address : xxx.xxx.xxx.xxx
Enter Subnet mask [255.255.255.0]::