6.Confirm that the DISK LEDs and the display of RDR utility change as shown below:
Synchronizing
| DISK LED | RDR Utility | |
| Op State: State | Status | |
|
| ||
Source disk | Amber | Simplex |
|
Destination disk | Green | Syncing |
|
RDR Virtual Disk |
| Simplex | Resync x percent |
|
| (x=0, 10, 20, ..., 90) | |
|
|
| |
IMPORTANT:
The time required for synchronization varies depending on the partition size on the disk. For 18GB partition, it takes about 16 minutes.
If there is no partition, synchronization may complete in a short period of time and the disk may become synchronized after RDR is set.
If the system is rebooted during synchronization, the process cannot be completed. Do not restart the system until the synchronization is completed.