8-48 System Upgrade

2.Build a dual LAN configuration. (See "Setting Dual LAN Configuration" in the separate volume “User’s Guide (Setup).”)

IMPORTANT:

You can also select [Load Balancing] in step 3 in "Setting Dual LAN Configuration". In this case, [Team #1:Adaptive Load Balancing Mode] is added to Network Component Tree.

Moreover, select [Stratus AA-U5700 Fiber Gigabit Server Adapter] instead of [Stratus emb-82559 10/100 Enet Adapter] in Steps 4 and 5.

PCI Board Status LED Indications

LED

Description

Action

indications

 

 

Amber

Duplex is specified,

Specify duplex (AFT, ALB).

 

however, the server works

Specify an appropriate driver.

 

in simplex mode.

 

Off

PCI board is properly

In non-duplex mode, no special problem

 

installed and operates in

occurs.

 

non-duplex mode (AFT,

 

 

ALB). (Does not depend on

 

 

simplex or duplex.)

 

 

PCI board is installed to

The system is operating normally in duplex

 

operate in the duplex mode.

mode.

 

The PCI board is not

Mount the PCI board correctly.

 

installed yet, the PCI board

If the PCI board was not mounted, there is no

 

is installed incorrectly, or the

problem.

 

power is not supplied.

Check the condition of power unit.

 

 

Remount the PCI module.

Red

In the process of configuring

Wait for a while until the indication changes. If

 

or canceling the duplex

the indication unchanged, check the PCI board

 

mode.

slot status using NEC ESMPRO Manager.

 

Although the PCI board is

Make the slot of the board installed from NEC

 

mounted, it may be offline

ESMPRO Manager online.

 

or not be working.

Mount the PCI board correctly.